Know the marks,
then bend the pipe.
A conduit bending calculator for electricians and apprentices. Enter the offset, get the marks, the shrink and the steps for every bend, in fractions or millimeters.
Built for the bender.
Quick answers on the job, with the math there when you want to check it.
Marks in Fractions
Type 6 1/2 and get a tape-measure answer. Bender-chart multipliers by default, exact trig when you want it, inches or millimeters.
Steps for Every Bend
Numbered instructions, including which way to flip the pipe, plus a Show the math view so you can check every number.
Plan the Whole Stick
Chain bends together and get every mark from the end of the pipe, the total shrink, the cut length and a 360 degree bend counter.
Parallel Offsets
Stagger the marks for a whole rack of conduit, with mixed sizes spaced by their real outside diameters.
Phone Protractor
Lay your phone along the bent leg to check the angle, with a tick when you hit a standard bend.
Start free.
Upgrade when the job gets bigger.
Offsets, kicks, 3-point saddles, rolling offsets, stub-ups and the Level tab are always free. Go Pro for 4-point saddles, parallel offsets, unlimited bend runs and saved jobs.
WHAT YOU GET WITH PRO
- 4-point saddles and parallel offsets for racks
- Unlimited bends in a run, with every mark from the pipe end
- Saved runs and shareable cut lists
- Custom bend angles
- The everyday bends stay free either way
Cancel any time · No account required
Free to download.
Get your marks in seconds. No account needed.
Get Conduit Bending Calculator on the App StoreSupport
Email SupportEmail support+conduitbend@fosterapps.com and include:
- A short description of what you were doing.
- Steps to reproduce the issue, if you know them.
- What you expected vs. what actually happened.
- Your device model and iOS version.
- Any screenshots that might help.
Privacy policy
Read the full policy at the Conduit Bending Calculator privacy page.